Win Shine Made in Taiwan
WS-PCA
WS-P CUP SERIES Paper Cup Making Machine
A Taiwanese-built cup former for coffee and tea cups at moderate speed. Other models in the same WS-P series use the same frame to cover small tasting cups up to large 35 oz tubs. Side seams are closed with hot air or ultrasonic sealing, and it runs board PE-coated on one or both sides.
Request a quote for this machineQuoted with delivery, installation and operator training.
Specifications
- Production speed
- Max 60 pcs/min
- Cup volume (WS-PCA)
- 6-12 oz
- Cup dimensions (WS-PCA)
- Ød1 65-98 mm, Ød2 40-92 mm, H 60-90 mm
- Series range
- 2.5-5 oz (WS-PCAA) up to 20-35 oz (WS-PCC)
- Paper
- Single or double PE coated, 240-360 g/m²
- Sealing
- Hot air heater or ultrasonic
- Electrical
- Approx. 10-12 kW
- Compressed air
- Approx. 0.6 MPa
- Machine size (L x W x H)
- 285 x 186 x 177 cm
- Machine weight
- 2500-2600 kg (net)
Manufacturer data. Options and exact configuration are confirmed in your quote.
Other paper cup machines
-
Mingguo
MG-HC800
Sleeve machine that adds an outer paper wall to formed cups to make insulated double-wall and corrugated hot-drink cups.
- Production capacity
- 90-120 pcs/min
- Cup size
- 4-16 oz (100-450 ml), mould exchangeable
- Top diameter
- 55-90 mm
-
PMC (Paper Machinery Corporation)
1003
High-volume two-piece cup and container former rated at up to 330 pieces per minute.
- Output
- Up to 330 cups/containers per minute
- Size range
- 3 oz (89 ml) to 32 oz (950 ml)
- Feed stock
- Pre-printed die-cut sidewall blanks + web-fed bottom stock
-
PMC (Paper Machinery Corporation)
PL 300
Servo-driven machine that forms two-piece convolute paperboard lids for paper cups and food containers up to 48 oz.
- Speed
- 110-170 lids/min (depends on lid size and caliper)
- Round lid diameter
- 2.5-6.5 in (63.5-165.1 mm), inside lower ring in-curl
- Non-round lid
- 4.4-7.3 in (112-185.4 mm), side wall strip max 20.5 in